Can I Use Pine-Sol on Wood Floors?
Wondering if you can use Pin-Sol on wood floors? You are not alone. Find out if you can use Pine-Sol on wood floors and learn how to use it the right way to get the best results.
Many property owners choose the beauty and strength of wood for the flooring in their homes. If you are a homeowner or a renter (like me) who lives in a home with wood flooring, your floors are probably always shiny and clean.
But do you always know what the best product is to use on wooden floors? You might have wondered if you can use Pine-Sol on your wood floors?
Pine-Sol can be used on wood floors that have been finished and sealed, so it is safe for cleaning engineered hardwood and laminated wood floors. Pine Sol is a registered EPA broad spectrum disinfectant with pine odor. Dilute the Pine-Sol with water and clean wood floors using a mop.
Read on for more information on the properties of Pine-Sol and how to correctly use this product on different types of wood flooring. This article will also address some frequently asked questions about Pine-Sol.
Related Articles:
- Pine-Sol Vs Fabuloso – Which is Better?
- Is Fabuloso Safe for Hardwood Floors
- Is Murphy Oil Soap Good for Laminate Floors?
- Can You Mix Bleach and Pine-Sol Together?
- Can You Use Pine-Sol on Carpet?
Is Pine-Sol Safe for Use on Wood Floors?
The natural composition of hardwood or synthetic wood is fragile, so you cannot use just any cleaning solution on this flooring. However, Pine-Sol is safe to use on wooden floors that have been sealed or finished. But Pine Sol must be diluted with water, and only a small amount should be used.
The Properties of Pine Sol
Pine-Sol has been used effectively to clean, disinfect, and deodorize flooring since 1929. It is a concentrated antiseptic gold/light brown colored liquid with a lovely pine odor. The Pine-Sol cleaning product is a blend of sanitizers, soaps, detergents, and conditioning agents.
This product will remove stubborn dirt and stains from your wood floors. Pine-Sol is an EPA-registered broad spectrum disinfectant that meets the standards for protecting the environment.
Can Pine-Sol be Used on All Wood Floors?
Pine Sol can be used on the following types of wooden floors:
Use Pine-Sol on Engineered Hardwood Floors
Engineered hardwood is more robust than solid wood floors and does not scratch or mark easily. Pine-Sol is safe for this wood as it is a water-based cleaning product and does not contain wax, oil, or ammonia.
Is Pine-Sol Good to Use on Laminated Floors?
Pine-Sol can be used on laminated floors and all finished wood flooring. But, once again, a caution to use Pine-Sol as stipulated on the product label.
How to Use Pine-Sol on Wood Floors
Pine-Sol will make your wood floors shine and make the room smell fresh and fragrant. Here is how to use Pine-Sol:
- First, vacuum the floor before mopping.
- You can use the original concentrated Pine-Sol and a mop.
- Dilute ¼ cup of Original Pine-Sol in 1 gallon of water.
- Dip the mop into the bucket and gently wring out excess water.
- Gently clean the floor following the direction of the wood.
- Don’t let the liquid pool as it can leave streaks on the wood and causes warping.
- You do not need to rinse off Pine-Sol but for laminated wood floors, wipe the floor with a mop dipped in clean water after mopping.
- Leave the floor to dry before walking over it.
For Stubborn Stains:
- You can use undiluted Pine-Sol on tough stains but not too much and not too often.
- Use a soft sponge, cloth, or an old toothbrush and gently rub away the mark on the floor.
- Do not use hard scouring pads or steel wool to remove the stain.
- After cleaning, wipe the area with a clean wet cloth.
- Do not leave the excess solution on the floor as this may crack or warp your wooden floor.
Using Pine-Sol Squirt:
- Squirt the Pine-Sol directly onto the floor in a 1 x 1-meter area. This product does not need to be diluted with water.
- Using a damp mop, wipe the area immediately.
- No rinsing is required.
- Continue until all areas of the floor have been cleaned.
- Leave the floor to dry before walking on it.
Should I Wear Gloves When Cleaning Floors with Pine-Sol?
Pine-Sol is declared safe to use, but if you are prone to skin irritation, then wearing gloves when using the product is recommended. If you do not wear gloves and your skin becomes irritated, thoroughly rinse your hands in clean water.
If you should get some Pine-Sol in your eye, it could cause irritation, so immediately rinse the eye with water.
FAQ About the Pine-Sol Floor Cleaner?
Below are some frequently asked questions regarding using Pine-Sol to clean wood floors.
Does Pine-Sol Contain Ammonia or Phosphorus?
Pine-Sol does not contain ammonia or phosphorus, which would damage hardwood floors.
Is Pine-Sol Biodegradable?
Pine-Sol products contain biodegradable cleaning agents, so unnecessary chemicals are not released into the environment.
What is the Shelf Life of Pine-Sol Products?
The shelf life of Pine-Sol products is 2 years. Although the color of the liquid may change, the product will still clean floors.
Is Pine-Sol Safe to Use Around My Pets?
Pine-Sol products can be used in areas with pets, but do not let any pet ingest the liquid.
Is the Scent of Pine-Sol Harmful to Babies or Pregnant Women?
Pine-Sol products are safe and meet federal safety regulations. Following the label instructions and cautionary texts on the product’s bottle is essential. Cleaning products should always be kept out of reach from children and pets.
Can Pine-Sol be Used on All Wooden Flooring?
It is not recommended to use Pine-Sol on unfinished, unsealed, unpainted, waxed, oiled, or worn wood.
Conclusion
Pine-Sol can be used to clean wood flooring that has been finished and sealed. It must be diluted with water using a ratio of ¼ cup to 1 gallon of water. Use a mop dipped into the Pine Sol solution to clean the floor, cleaning a small section of the floor at a time.
The mop should not be too wet, which will leave pools of liquid on the floor as this will leave marks on the wood, causing it to warp. Pine-Sol does not need to be rinsed off, but laminated floors must be wiped with a mop dipped in clean water after washing. It is an EPA-registered product and is safe to use around pets and children.